Emerald And Trillion Cut Diamond Three Stone Ring (0.24cttw)
Item# R10754EM
This highly elegant engagement ring comes precision set with two very well matched trillion cut diamonds prong set with 0.64cts. on either side of a center emerald. This mounting is available in platinum, white gold and yellow gold.
Safe and Secure Shopping
For any questions on this setting or to customize, please call us at (888) 436-7692
Use the search bar to help you
select your perfect emerald
Your Setting
None Selected
SUBTOTAL: Select an item
Color
Intense Green - This is the highest color grading for our emeralds. Color of these emeralds is as deep of a green an emerald can get without turning opaque or being overly colored. Brilliance of these emeralds is also excellent.
Vivid Green - Color of these emeralds is a shade less of a green than intense. Such emeralds have extremely rich green vivid color and are highly sought after.
Deep Green - Such emeralds are overly green (which is preferred by many people). Such stones generally don't have as much brilliance as the intense green stones, due to the depth of saturation of color, but are preferred by a lot of conusmers because they are significantly less in price than an intense green emerald.
Such emeralds are still quite rare and in demand.
Medium Green - Such emeralds are very pleasant to the eyes as they are not too dark or too light and have very good brilliance to them. These emeralds generally have 50 to 70% color saturation.
Soft Green - Such emeralds are lighter in color than medium green emeralds and generally have color saturation of 20-40%. These emeralds have very good to excellent brilliance.
FL- This is the highest clarity grade a emerald can have. This means the gemstone is 100% clean to the eye to a trained, experienced gemologist but not necessarily under 10X or higher magnification.
VVS1, VVS2- This grading means the emerald would be 100% eye clean to an untrained eye but a gemologist might be able to observe very, very tiny inclusions from certain side angles.
VS1, VS2- This means very tiny inclusions would be visible under very close inspection to an untrained eye.
SI1, SI2- Slight visible inclusions upon inspection would be visible to an untrained eye but inclusions are not affecting the brilliance or the color in the emeralds.
I1- These emeralds are highly included where the inclusions hinder the brilliance and color of the emerald.
Is the longer of the sides in a gemstone. However, for round and square shape (also princess cuts) the length and the width will be the same.
In order to determine which length and width measurement s are required, please print out our stone size chart.This chart compares actual sizes of gemstones in various different measurements. Once the measurement values that are required is determined, please input these values in the measurement length and width combo box to see only those gemstones which meet the search requirements.
Enhancements
Ceder Oil - Among emeralds it is a general practice among the manufacturers to oil the emeralds to enhance the color of the gem. This treatment has been there in the industry for a long time and is accepted worldwide. In fact, this treatment is so common that in the trade if an individual asks for an emerald it is understood they want oiled emerald. Probably over 99% of all emeralds used in today's jewelry are oiled.
None - Emeralds which have no enhancements at all have only traditional process of cutting and polishing applied to them in order to improve the appearance or durability of the gem. Such emeralds are extremely rare and are for collectors only as they are extremely expensive.
Carat weight is the unit of measurement that is used by the jewelry industry to weigh gemstones. 1 carat is equal to .2grams or there are 5 carats in 1 gram.
We suggest when looking for gemstones it is better to search by measurements rather than carat weight. This is more important as visually how large a gemstone appears is more important than how much it weighs. Click here for our stone size chart. Click here for our stone size chart.
Is the shorter of the sides in a gemstone. However, for round and square shape (also princess cuts) the length and the width will be the same.
In order to determine which length and width measurement s are required, please print out our stone size chart.This chart compares actual sizes of gemstones in various different measurements. Once the measurement values that are required is determined, please input these values in the measurement length and width combo box to see only those gemstones which meet the search requirements.
Stone Type
Single
Choose this option if you want to buy only a single emerald. Most rings and pendants take only one single emerald in the center. After choosing a emerald of your choice you will have the option of adding it to GemsNY's wide collection of ring and pendant semi mounts to make your own personalized ring or pendant!
Pair
Choose this option if you want to buy a matching set of emeralds for earrings or for three stone rings and pendants where these emeralds will be used as side stones. After selecting your set of emeralds you will have the option of adding them to our vast collection of earrings and stud earrings.
{popup_certificate_string1}
{popup_certificate_string2}
{popup_appr_string}
Emerald And Trillion Cut Diamond Three Stone Ring (0.24cttw)
Emerald And Trillion Cut Diamond Three Stone Ring (0.24cttw)
All payments made by wire transfers will receive a 1.5% discount. This discount is available to you due to the charges imposed by credit card companies. We will email you the instructions for the wire transfer after your purchase.
1-888-436-7692
FREE Shipping
30-Day Returns
Cart (0)
1. Select Your Emerald
2. Choose Your Setting
3. Review Your Ring
